Converting Files into Minecraft Worlds

Did you ever want to store the Minecraft movie in Minecraft? No? Too bad, because now you can.

I recently had the silly idea to convert a file into a Minecraft world. This led me down a really cool rabbit-hole, learning a ton about 3D geometry, byte layouts and Minecraft.

The core idea is pretty simple: I want to take any file and be able to view it in Minecraft blocks.

Along the way I also managed to convince my code that a tiny text-file is 2.3 exabytes large.

The first thing you need is a lookup table. A byte can hold one of 256 values (0–255), and luckily there are way more than 256 blocks in Minecraft, so I can hand every single byte its own block. Byte 0 becomes stone, byte 1 becomes granite, all the way up to 255 .

A bunch of blocks carry state that changes on its own or depends on placement: wheat, carrots and other crops have an age , water and lava have a level . If byte 42 decoded to wheat and that wheat grew a stage, my decoder would read the wrong byte and the whole file would be in shambles.

I first get the block data for 1.21.11 with mcdata_rs , throw out anything with an age or level state (plus beds and chests, more on those later), take the first 256 blocks, and write them into a Rust file as a fixed array.

( At the end of the video you can see the filter process where the blocks get filtered down to only good blocks )

use mcdata_rs :: mc_data; use std :: {fs, path :: Path }; const NAUGHTY_LIST : & [ & str ] = & [ "sand" , "gravel" , "anvil" , "dragon_egg" , "scaffolding" , "dripstone" , "snow" , "farmland" , "chest" , "_bed" , "door" , "ice" , "grass_block" , ]; fn main () { let data_1_21_11 = mc_data ( "1.21.11" ) . expect ( "Failed to download Minecraft Block Data" ); let palette = data_1_21_11 . blocks_array . iter () . filter ( | b | b . bounding_box . eq ( "block" )) . filter ( | b | { ! b . states . iter () . any ( | s | matches! (s . name . as_str (), "age" | "level" | "part" )) }) . filter ( | b | ! NAUGHTY_LIST . iter () . any ( | g | b . name . contains (g))) . collect :: < Vec <_>>(); let names : Vec < & str > = palette . iter () . take ( 256 ) . map ( | b | b . name . as_str ()) . collect (); let mut out = String :: new (); out . push_str ( "pub const PALETTE: [&str; 256] = [ \n " ); //TODO: make this cleaner for name in & names { out . push_str ( " \" minecraft:" ); out . push_str (name); out . push_str ( " \" , \n " ); } out . push_str ( "]; \n " ); let out_path = Path :: new ( env! ( "CARGO_MANIFEST_DIR" )) . join ( "src/palette.rs" ); fs :: write (out_path, out) . expect ( "Failed to write palette" ); println! ( "Wrote {:?} blocks to palette.rs" , names . len ()); } That gives me a PALETTE: [&str; 256] , and the two functions that do the translation are pretty straightforward:

pub fn byte_to_block (byte : u8 ) -> & ' static str { PALETTE [byte as usize ] } pub fn block_to_byte (block : & str ) -> Result < u8 , SulfurError > { PALETTE . iter () . position ( | palette_block | * palette_block == block) . map ( | i | { u8 :: try_from (i) . expect ( "palette has exactly 256 entries so this will never happen" ) }) . ok_or ( SulfurError :: BlockNotInPalette (block . to_string ())) } byte_to_block is just an array index, and block_to_byte is the reverse lookup.

Now that a byte maps to a block, I need to decide where each block goes.

We fill a 16x16 floor first, then move one block up, and once a full 16x16x16 cube is filled, jump to the next one. That 16x16x16 cube is a section, which is 4096 blocks.

One section is only the start though. A Minecraft world goes from Y -64 to Y 320 , which is 384 blocks, or 24 sections stacked on top of each other. So instead of stopping after one section, I fill an entire chunk column bottom to top, all 24 sections, before moving sideways to the next chunk.

A region file ( .mca ) is a 32x32 grid of chunks, so once you multiply it all out:

32 x 32 chunks x 24 sections x 4096 blocks = ~96 MiB per region .

pub fn cube_coords (byte_location : usize ) -> silverfish :: Coords { const SECTION_SIZE : usize = 16 ; const BLOCKS_PER_SECTION : usize = SECTION_SIZE * SECTION_SIZE * SECTION_SIZE ; const MAX_CHUNKS : usize = 32 ; const SECTIONS_PER_COLUMN : usize = 24 ; const MIN_Y : i32 = - 64 ; let inside_section = byte_location % BLOCKS_PER_SECTION ; let section_number = byte_location / BLOCKS_PER_SECTION ; let x_inside = inside_section % SECTION_SIZE ; let y_inside = inside_section / ( SECTION_SIZE * SECTION_SIZE ); let z_inside = (inside_section / SECTION_SIZE ) % SECTION_SIZE ; let layer = section_number / SECTIONS_PER_COLUMN ; let section_x = layer % MAX_CHUNKS ; let section_y = section_number % SECTIONS_PER_COLUMN ; let section_z = (layer / MAX_CHUNKS ) % MAX_CHUNKS ; let x = u32 :: try_from (section_x * SECTION_SIZE + x_inside) . expect ( "coordinate overflow" ); let y = MIN_Y + i32 :: try_from (section_y * SECTION_SIZE + y_inside) . expect ( "coordinate overflow" ); let z = u32 :: try_from (section_z * SECTION_SIZE + z_inside) . expect ( "coordinate overflow" ); (x, y, z) . into () } Maybe the tests make it easier to follow:

( Encoded data; my Cargo.lock to be exact )

Read the file, create an empty region, write a small header (more on that below), then walk every byte, convert it to a block, and place it at its cube_coords . Then write it to a .mca region file.

pub fn file_to_region ( source_file : impl AsRef < Path >, region_file : impl AsRef < Path >, ) -> Result <(), SulfurError > { let source_file = source_file . as_ref (); let region_file = region_file . as_ref (); if ! source_file . exists () { return Err ( SulfurError :: InputFileNotFound ); } let input_file = std :: fs :: read (source_file) ? ; if HEADER_SIZE + input_file . len () > REGION_CAPACITY { return Err ( SulfurError :: EncodedPayloadTooLarge ); } let mut region = Region :: default (); region . set_config ( Config :: new ( true , true , Config :: DEFAULT_WORLD_HEIGHT )) ? ; let header = Header :: new (input_file . len () as u64 ) . to_bytes (); for (location, byte) in header . iter () . enumerate () { region . set_block ( cube_coords (location), byte_to_block ( * byte)) ? ; } for (byte_location, byte) in input_file . iter () . enumerate () { region . set_block ( cube_coords (header . len () + byte_location), byte_to_block ( * byte), ) ? ; } region . write_blocks () ? ; region . write ( &mut std :: fs :: File :: create (region_file) ? ) ? ; Ok (()) } Decoding Load the region, read the header blocks back into bytes to find out how big the original file was, then read exactly that many payload blocks, run each one through block_to_byte , and stream the bytes back to disk.

pub fn region_to_file ( region_file : impl AsRef < Path >, output_file : impl AsRef < Path >, ) -> Result <(), SulfurError > { let region_file = region_file . as_ref (); let output_file = output_file . as_ref (); if ! region_file . exists () { return Err ( SulfurError :: InputFileNotFound ); } let region = Region :: from_region ( &mut std :: fs :: File :: open (region_file) ? , ( 0 , 0 )) ? ; let header_coords : Vec < Coords > = ( 0 .. HEADER_SIZE ) . map (cube_coords) . collect (); let header_batch = region . get_blocks ( & header_coords) ? ; let raw_header_bytes = header_coords . iter () . map ( | coord | { let block = header_batch . get ( * coord) ? . ok_or ( SulfurError :: MissingBlockAt ( * coord)) ? ; block_to_byte ( & block . name . to_str ()) }) . collect :: < Result < Vec < u8 >, _>>() ? ; let (header, header_len) = Header :: from_bytes ( & raw_header_bytes) ? ; let file_size = usize :: try_from (header . file_size) . map_err ( | _ | SulfurError :: EncodedPayloadTooLarge ) ? ; let end = header_len . checked_add (file_size) . ok_or ( SulfurError :: EncodedPayloadTooLarge ) ? ; let coords : Vec < Coords > = (header_len .. end) . map (cube_coords) . collect (); let batch = region . get_blocks ( & coords) ? ; let mut file_buffer = std :: io :: BufWriter :: new ( std :: fs :: File :: create (output_file) ? ); for coord in & coords { let block = batch . get ( * coord) ? . ok_or ( SulfurError :: MissingBlockAt ( * coord)) ? ; file_buffer . write_all ( & [ block_to_byte ( & block . name . to_str ()) ? ]) ? ; } file_buffer . flush () ? ; Ok (()) } Mistakes I made The Flat Slab My very first version of cube_coords worked, but it threw away most of the world. I only ever placed blocks in a single 16-block-tall layer starting at Y 0 and spread the sections out horizontally:

pub fn cube_coords (byte_location : usize ) -> silverfish :: Coords { const SECTION_SIZE : usize = 16 ; const BLOCKS_PER_SECTION : usize = SECTION_SIZE * SECTION_SIZE * SECTION_SIZE ; const BASE_Y : usize = 0 ; const MAX_BLOCKS : usize = 32 ; let inside_section = byte_location % BLOCKS_PER_SECTION ; let section_number = byte_location / BLOCKS_PER_SECTION ; let x_inside = inside_section % SECTION_SIZE ; let y_inside = inside_section / ( SECTION_SIZE * SECTION_SIZE ); let z_inside = (inside_section / SECTION_SIZE ) % SECTION_SIZE ; let section_x = section_number % MAX_BLOCKS ; let section_z = (section_number / MAX_BLOCKS ) % MAX_BLOCKS ; let x = u32 :: try_from (section_x * SECTION_SIZE + x_inside) . expect ( "coordinate overflow" ); let y = i32 :: try_from ( BASE_Y + y_inside) . expect ( "coordinate overflow" ); let z = u32 :: try_from (section_z * SECTION_SIZE + z_inside) . expect ( "coordinate overflow" ); (x, y, z) . into () } Because y never climbed past 15, every world came out as a flat 512x512 slab that’s only 16 blocks tall. Which is about ~4 MiB per region, when a region can hold ~96 MiB.

The issue was that I was trying to read the first 8 bytes of the .mca file and use that as the file size. That gave me a value of 2338328528344327162 , which I then happily tried to treat as a length… 2.3 exabytes.

The problem is that a raw region file has its own format and its own header, so the first bytes I was grabbing were never my data to begin with.

const MAGIC : [ u8 ; 4 ] = * b"SULF" ; // magic + size pub const HEADER_SIZE : usize = 12 ; pub struct Header { pub file_size : u64 , } impl Header { pub fn new (file_size : u64 ) -> Self { Self { file_size } } pub fn to_bytes ( & self ) -> Vec < u8 > { let mut bytes = Vec :: new (); bytes . extend ( & MAGIC ); bytes . extend ( & self . file_size . to_le_bytes ()); bytes } pub fn from_bytes (bytes : & [ u8 ]) -> Result <( Self , usize ), SulfurError > { if bytes . len () < HEADER_SIZE { return Err ( SulfurError :: InvalidHeaderSize ( HEADER_SIZE , bytes . len ())); } if bytes[ 0 .. 4 ] != MAGIC { return Err ( SulfurError :: InvalidMagicBytes ); } let size_bytes = bytes[ MAGIC . len () .. HEADER_SIZE ] . try_into () . map_err ( | _ | SulfurError :: InvalidHeaderSize ( HEADER_SIZE , bytes . len ())) ? ; let file_size = u64 :: from_le_bytes (size_bytes); Ok (( Self :: new (file_size), HEADER_SIZE )) } } Invisible Blocks Beds and double chests where invisible. Both are “multi-blocks”: a bed is a head and a foot, a double chest is two halves. It did not break my decoder but it just looked ugly as hell. I just added to the NAUGHTY_LIST array.

Jeb truly was goated. (He wrote the Anvil File Format)

And yes the Minecraft movie fits (downsampled into oblivion).

In the future I plan to add some kind of creeper/TNT protection and make it output large multi-region worlds so you can encode any file no matter how big it is.

I’ve never written this kind of blog post before. If you have any improvements to share, please email me .

If you are interested in trying it yourself you can head to the repo here:

https://codeberg.org/wuemeli/sulfur ( don’t forget to star it :)